Dell PowerVault MD1200 Storage
- Operating System: Refer to RAID Card for details on supported Operating Systems PERC H810
- SAS connectors (per EMM): 1 SAS (SFF 8088) IN connector for connection to the host, 1 SAS (SFF 8088) OUT connector for expansion to an additional enclosure
- Serial connector (per EMM): 1 6 pin UART mini-DIN connector (for factory use only)
- Chassis Height : 8.7cm (3.43 inches)
- Chassis Width : 48.2cm (18.98 inches)
- Chassis Depth : 59.4 (23.39 inches)
- Chassis Weight : 28.39 kg (62.6 lb) (maximum configuration)8.84 kg (19.5 lb) (empty)
- SAS connectors (per EMM): 1 SAS (SFF 8088) IN connector for connection to the host, 1 SAS (SFF 8088) OUT connector for expansion to an additional enclosure
- Serial connector (per EMM):1 6-pin UART mini-DIN connector (for factory use only)
- Connectivity:
- (A)Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H810 (4 enclosures per port, single path)
- (B)Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H810 (4 enclosures connected to both ports via redundant path cabling)
- (C)Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 5 and a separate connectivity to drives 6 through 11.
- Environmental Operating Conditions:
- (A)Temperature:
- Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour
- Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour
- Supports Fresh Air cooling, up to 35 degrees Celsius
- (B)Relative humidity:
- Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
- Storage: 5% to 95% (non-condensing)
- (C)Altitude:
- Operating: -16 to 3048 m (-50 to 10,000 ft)
- Storage: -16 to 10,600 m (-50 to 35,000 ft)
- LED Indicators :
- (A)Front panel
- 1 two-color LED indicator for system status
- 2 single-color LED indicators for power and split mode
- (B)Drive carrier
- 1 single-color activity LED
- 1 two-color LED status indicator per drive
- (C)EMM
- 3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status
- 1 single-color Unit Identification LED for each EMM
- (D)Power supply/cooling fan module
- 3 LED status indicators for power supply status, power supply/fan fault and AC status
- Management :
- 2 Enclosure Management Modules(EMM) provide redundant enclosure management capability
- Power :
- Two fully redundant power supplies; supports DC power
- Wattage: AC - 600 W; DC – 700 W
- Heat dissipation: AC - 2047BTU/hr; DC - 2388 BTU/hr
- Voltage: 100-240 VAC, auto sensing; 48V DC
- Frequency: 50/60 Hz
- Amperage: 8.6 A at 100 V, 4.3 A at 240 V
- Available Drive Power (per slot)
- Supported drive power consumption (continuous):
- up to 1.16 A at +5V
- up to 1.6 A +12V
- RAID : PERC H800 supports RAID levels 0, 1, 5, 6, 10, 50 and 60.
- Storage :
- (A)Drives :
- Up to twelve (12) hot-pluggable SAS Hard Disk Drives (HDDs) at 7.2K, 10K and 15K rpm and SAS Solid State Drives (SSDs)
- (B)Drive performances and capacities :
- (I)3.5” 6Gbps SAS:
- HDD 15K – 300GB, 450GB, 600GB
- HDD 7.2K – 1TB, 2TB, 3TB, 4TB
- HDD 7.2K NL-SAS 512e – 6TB
- (II)3.5” 12Gbps SAS:
- HDD 7.2K NL-SAS 512e – 6TB, 8TB, 10TB
- (III)2.5” 6Gbps SAS with 3.5” carrier:
- HDD 10K – 300GB, 600GB, 900GB, 1.2TB
- HDD 10K 512e– 1.8TB
- SSD – 400GB mainstream SLC
- SSD – 200GB, 800GB value SLC
- SSD – 800GB RI MLC
- SSD – 200GB, 400GB WI SLC
- (IV)2.5 12Gbps SAS with 3.5 carrier: 7.2K HDD NL-SAS 512e 2TB, SSD 200GB, 400GB, 800GB, 1.6TB MU MLC
- SSD – 200GB, 400GB, 800GB WI MLC
- SSD – 800GB, 1.6TB RI MLC
- (C)Maximum Capacity (per enclosure): Up to 120TB when using 12 x 10TB NL-SAS 3.5 HDDs
- (D)Expansion Capabilities: PERC H810 Host RAID adapter enables expansion to 8 enclosures (4 enclosures per port)
