Dell Precision 7920 Rack Workstation
- Processor :One or two Intel Xeon Scalable Processor family
- CPUs (1st and 2nd generation) with up to 28
- cores per processor and Intel Advanced Vector
- Extensions, Intel Trusted Execution Technology,
- Intel AES New instructions, Optimized Intel Turbo
- Boost and optional Intel vPro™ technology
- Operating System :
- Windows 10 Pro for Workstations (up to 4 Cores)
- Windows 10 Pro for Workstations (4 Cores Plus)
- Red Hat Enterprise Linux 7.5
- Red Hat Enterprise Linux 8.0 (Sept. 2019)is required for 2nd Generation Xeon SP(Cascade Lake) CPUs
- Ubuntu Linux 16.04, 18.04
- Chipset : Intel C621 (Lewisburg)
- Memory : Six channel memory up to 1.5TB 2666MHz DDR4
- ECC memory with dual CPUs, up to 3TB with select
- CPU SKUs Up to 768GB of 2933MHz DDR4 ECC memory
- 24 DIMM Slots (12 DIMMs per CPU). Note: memory
- speed is dependent on specific Intel Xeon Scalable
- Processor CPU installed
- Graphics :Support for 3 PCI Express x16 Gen 3 graphics cards1 up to 900W with 3 x 300W double width
- graphics cards (dual CPU configuration)
- Dual non redundant 1600W PSUs 220V
- required for select high wattage graphics card
- configurations, and some restrictions apply
- High end 3D cards:Radeon Pro WX 9100, Radeon Pro SSG, NVIDIA Quadro GV100
- NVIDIA Quadro P6000
- NVIDIA Quadro RTX 8000 (future)
- NVIDIA Quadro RTX 6000
- NVIDIA RTX 5000
- NVIDIA Quadro P5000
- Mid range 3D cards: Radeon Pro WX 7100, Radeon Pro WX 5100, Radeon Pro WX 4100
- NVIDIA Quadro RTX 4000
- NVIDIA Quadro P4000
- NVIDIA Quadro P2000
- Entry 3D cards: NVIDIA Quadro P620, NVIDIA Quadro P400 Integrated VGA graphics motherboard connector
- (part of iDRAC9 Systems Management and requires iDRAC9 Enterprise license to enable)
- Storage : Support for up to (8) 2.5” or 3.5” SATA/SAS drives
- Up to 8 x M.2 NVMe PCIe SSDs via 2 x Dell UltraSpeed Drive Quad x16 cards
- (maximum requires dual CPUs), NVMe RAID 0,1,10 option on 1st card (Intel RSTe vROC)
- PERC PCIe controllers required for SAS drive
- support M.2 NVMe PCIe SSDs
- Up to 8* x 2TB drives on 2 Dell Precision
- Ultra Speed Drive Quad x16 cards
- Requires dual CPU config
- Storage : 2.5 SATA SSD
- Up to 8 x 1TB
- 2.5 SAS SSD
- Up to 8 x 800GB
- 2.5 SATA 7200 RPM
- Up to 8 x 2TB
- 3.5 SATA 7200 RPM
- Up to 8 x 8TB
- 2.5 SAS 10K RPM 12Gb/s
- Up to 8 x 1.8TB
- 2.5 SAS 15K RPM 12Gb/s
- Up to 8 x 600GB
- Storage Controller Integrated: 2 x Intel chipset AHCI 6Gb/s SATA
- controllers with 4 ports (total 8) each for HDD/SSD
- One port for optical drive
- Intel RSTe software RAID 0, 1,5,10 supported across
- 4 SATA ports on 1st controller only. (Maximum 4 drives in RAIDset)
- Intel RSTe (vROC) software RAID 0,1,10 option
- (motherboard activation key) for M.2 NVMe PCIe
- SSDs on 1st Dell Ultra-Speed Drive Quad x16
- or Duo x8 card (0,1). Customer kit available for Intel
- RSTe (vROC) motherboard activation key for NVMe
- RAID support
- Optional: PERC H330 12Gb/s SAS (6Gb/s SATA) 8
- port PCIe controller supports JBOD and software
- RAID 0,1,5,10
- PERC H730P PCI-e SAS 12Gb/s (SATA 6Gb/s)
- Hardware RAID PCIe controller with 1GB cache
- (Super Cap backup, RAID 0/1/5/10 (no JBOD)
- PERC H740P PCI-e SAS 12Gb/s (SATA 6Gb/s)
- Hardware RAID PCIe controller with 4GB cache
- Network Daughter Cards :
- Base: Intel i350-Quad port 1Gb Ethernet Network
- Daughter Card (4 x 1Gb ports)
- Optional: Intel X550-Dual port 10Gb + Intel I350
- Dual port 1Gb Ethernet Network Daughter card (2 x
- 10Gb + 2 x 1Gb ports )
- Intel X710 Dual port 10Gb DA/SFP+, + I350 Dual
- port 1Gb Ethernet Network Daughter card
- Integrated: Integrated Broadcom® BCM54210
- Ethernet LAN 10/100/1000 for iDRAC9 controller
- use with System Management tool suite
- (Super Cap backup), RAID 0/1/5/10 (no JBOD)
- Note: Windows 7 is not supported on the PERC
- H740P controller. PERC controllers are installed in Slot 3
- Add-in cards : Optional: Dell Precision Ultra-Speed Drive Duo
- (HH/ HL,x8 card) and Ultra-Speed Drive Quad
- (FH/FL,x16 card) with active cooling. Support for up to 2
- and 4 M.2 NVMe PCIe SSDs respectively
- USB 3.1 (Gen 2) 10Gb/s Type C card (2 ports) 1 DP
- pass through port Optional: Dual & quad (FH card)
- display Teradici PCoIP PCIe remote workstation
- access cards. Full height and low profile bracket
- versions of dual display card available. Serial Port
- PCIe Card (single port)
- I/O Ports : Front :
- 2 USB 2.0
- 1 USB 2.0 Management port (IDRAC9)
- 1 VGA Port for iDRAC9
- Internal : 1 USB 3.1 Type A – supports standard USB
- storage key : SD Vflash media connector
- Rear : 2 USB 3.1 Type A
- 4 RJ45 Network
- 1 Serial
- 1 RJ45 for iDRAC
- 1 A VGA Port for iDRAC
- Chassis : HxWxD: 3.41 x 17.0 x 28.37 (29.78 with bezel)
- 86.8mm x 482mm x 715.5mm (751.3mm with bezel)
- Bays: (1) external slimline optical bay; (8) front
- accessible 3.5” bays (support total of (8) 3.5 or
- 2.5 HDD/SSD drives)
- Slots: All slots PCIe Gen 3. (6) PCIe full height/full
- length slots, (1) PCIe full height/half length slot, (1)
- PCIe low profile/full length slot
- Up to (3) double width x16 cards supported
- All slots x16 mechanically
- With single CPU – (1) x x16, (1) x x8, (1) x x8 half
- length, (1) x x8 low profile PCIe slots
- With dual CPUs (2) x x16, (2) x x8 PCIe slots
- Power Supply: One or two redundant hot pluggable
- 1100W –90% efficient (80PLUS Gold Certified)
- Available 1600W PSU in non-redundant mode
- 220V is required for certain configurations
- Storage devices : Slimline options: DVD-ROM; DVD+/-RW
- Security Options : Trusted Platform Module (TPM 1.2 or TPM 2.0)
- chassis Intrusion switch; Setup/BIOS Password; I/O
- Interface Security; lockable front bezel, Dell Data
- Guardian, Dell Endpoint Security Suite Enterprise
- Warranty & Support Services :
- 3 Year Limited Hardware Warranty and 3 year NBD
- On Site Service after Remote Diagnosis
- Optional: Dell ProSupport is designed to rapidly
- respond to your business’s needs, help protect
- your investment and sensitive data, and provide
- enhanced proactive support services to help reduce
- risk and complexity within your IT environment
